I have modified
Code: Select all
./polymer/level1_nasa.py
Code: Select all
./polymer/params
It would be great to include it to the next release.
I have noticed some inconsistencies between the coefficients in POLYMER and the ones in the table on the NASA website (https://oceancolor.gsfc.nasa.gov/resour ... sr_tables/). There is only one set of coefficients for both MODIS and one set for both OLCI although there is one set for each sensor (MODISA, MODIST, OLCI-a, OLCI-b) on the NASA website. Should these coefficients be updated to improve across sensor consistency?
I also found missing coefficients for MSI in
Code: Select all
./polymer/params
Code: Select all
self.K_OZ = { # FIXME: rough values from OLCI
443 : 2.897E-03,
490 : 2.066E-02,
560 : 1.058E-01,
665 : 5.005E-02,
705 : 1.887E-02,
740 : 8.743E-03,
783 : 7.700E-03,
842 : 0.,
865 : 2.156E-03,
945 : 0.,
1375: 0.,
1610: 0.,
2190: 0.,
}
self.K_NO2 = { # FIXME
443 : 0.,
490 : 0.,
560 : 0.,
665 : 0.,
705 : 0.,
740 : 0.,
783 : 0.,
842 : 0.,
865 : 0.,
945 : 0.,
1375: 0.,
1610: 0.,
2190: 0.,
}
Guillaume